*레인보우 드래곤 루프 디자인 [ DTACC and Agence Jouin Manku ] Office amenities building

반응형


새롭게 리노베이션된 오피스 빌딩의 인상적인 외형은 전체 건축물의 디자인을 정의하는 무지개 컬러의 지붕 디자인에서 구현된다. 1920년대 공장건물을 새롭게 재구성한 건축물은 200명 수용 가능한 오디토리움과 보드룸, 오피스, 그외 카페 및 레스토랑으로 구성된다.

3층규모의 오피스 빌딩의 주요한 디자인 이슈를 던지는 지붕 디자인은 무지개 컬러의 타일을 접어 붙이며, 보는 이의 시각 차이에 따라 파란색에서 보라색으로 다양한 스펙트럼의 컬러를 구현한다. 이것은 유선형의 건축물을 감싸는 완만한 곡선의 지붕과 더불어 생동감 있는 공간을 생성한다. -관찰자의 시선이 흐를수록 지붕 타일은 마치 용의 비늘처럼 살아서 꿈틀거린다.-

여기에 인상적인 지붕 디자인과 대비를 이루는 외벽면은 클리어한 글래스 파사드와 버티컬 우드 패널로 마감, 비정형적인 지붕과 정형화된 대지의 경계를 모자람없이 소통, 연계시키는 건축적 매개체로 사용된다.


reviewed by SJ


An office "campus", for Société Foncière Lyonnaise, an ambitious architectural project including the transformation of the lobby with the construction of a glass microarchitecture as well as the creation of a new wing.




80 years of history
Built in 1927 by the architect Adolphe Bocage, this building, a landmark of the golden age of industry, had long been used to produce telephone control units. Located on the banks of the Seine, the site, with nearly 7 acres and a 6-storey building, used to hold the lMT society (le Matériel Téléphonique). The building soon became a symbol of industrial innovation.

The site had been designed in keeping with the great principles of the Modern Movement in architecture using simple geometrical shapes, and reinforced concrete. In 1976, Thomson-CsF took control over lMT, who, at the time, employed 10 000 people.

In 1988, seventy years after its construction, Thomson Multimedia transformed the factory into offices and set up its headquarters in the building, until 2009. SFL then decided to restructure the building, aiming for it to become a benchmark in the tertiary sector, focusing on innovation as well as on wellbeing at work. It is this ambitious decision that gave birth to the major IN/OUT project.

The site's new organisation
After our first commission to design a series of spaces for the Mandarin Oriental hotel in Paris, Société Foncière Lyonnaise (SFL), has asked us once again to embark on another adventure. This time, they have commissioned us to design a new amenities wing of their ambitious In/Out office campus, a landmark office project that is re-defining work spaces in France which houses a cafe, restaurant, board rooms, an auditorium as well as various technical spaces and the lobby, with his pavilion, of the historical building.

The IN/OUT project involves an office campus of more than 387 500 square feet. It is located on a former industrial site in Boulogne, at the West of Paris, on the right bank of the Seine River. This factory, which used to manufacture telephone tools in the 1930s, underwent a complete rehabilitation done by DTACC Architecture, such as many industrial sites in Boulogne.

This new amenities wing is nearly 40 000 sq ft.including the interiors. This building was further developed in collaboration with the engineering office TESS for the structural elements and the skin of the building and with architectural agency DTACC for the technical development and architectural execution.

The amenities wing
Agence Jouin Manku has conceived the new amenities wing (nearly 40 000 sq ft.), as well as the interior design of the wing. The building has been further developed in collaboration with the engineering office TESS and DTACC. The new wing also holds a series of services and amenities, alongside the workspaces within the 'Bocage' building (thus completing the IN/OUT campus). The wing holds: a 103 seats cafe, a 462 seats restaurant, a 200 seats auditorium, as well as corporate board rooms, lounges, 2 large terraces and a fitness centre.


A dynamic shape, symbol of an avant-garde building
How can workspaces in big companies be improved? What is missing? This interrogation has guided the design of the amenities wing. Agence Jouin Manku decided to create a very different atmosphere to complement the 'Bocage' building. This gives employees a healthy balance between formal and informal, as well as between work and play, an idea at the heart of the In/Out Campus.

The structure of the 'Bocage' building evokes nostalgia, professionalism and rigour. In contrast, the new wing has been conceived as a building of contemporary architecture, designed around the idea of movement and flow. Its shape has been made to create a series of intertwined spaces. The building is organised around the idea of passage: passing of people, light and air. It is also a place which evokes movement, production, action and dynamism.

The concrete heart: the centre of the building
The building is organised around a central tower, made of bush hammered concrete, which holds all vertical circulation. The choice to use concrete for the centre of the building was to create a coherence and dialogue with the neighbouring 'Bocage' building, which is made of the same material and clearly shows its original industrial character. Two wings revolve and wrap around the central tower, but they never meet. Their architectural lines are softer and each wing is a curved form, made of curved glass and vertical wood cladding. The spaces between the concrete centre and the wood wings are filled with glass, which allows light to penetrate almost everywhere in the building, vertically or horizontally.

On the outside, the density of the vertical wood cladding increases and decreases, depending on its position, and which indoor space it corresponds to. The pattern starts out smoothly, then its texture, created by adding chamfers, changes. These edges catch light differently and create a sense of depth on the facade. Inside, the main materials are wood, bush hammered concrete, plaster and curved glass. The curved wood that wraps a large part of the interior adds to the sense of warmth, while the simple use of glass and concrete add a crisp modernity to the project. A footbridge connects the two buildings. This bridge, made of white painted steel and wood, makes access easy between the two buildings, and acts as a symbolic link betweenthe two architectural signatures, and the birth of a common project.

An architecture inspired By nature: an inside out and outside in design
Inspired by the Saint-Cloud park, the Seine river and the lush nature just close to the site, the amenities pavilion has been designed to allow these elements to penetrate the building, as well as to create spaces that would allow one to enjoy the gardens and terraces, created as an extension of the building. The flowing shapes of the project recall the movements of nature. To underline this idea, the roof of the wing has been designed as a coloured envelope wrapping the building. The coloured stainless steel tiles were chosen for their particular iridescent character. In front view, the tiles are green, but their colour changes as the angle and light move. This gives the building a dynamic and always changing character, echoing the variations in the sky and sunlight.

The insides
The interior design and furniture have been thought out as a continuation of the outside lines of the building. While the central concrete core holds the curved staircase that links the various levels of the building, each level opens out on spaces filled with light: simple yet warm spaces, spaces that open out on terraces and gardens, as well as spaces that invite one to discover the next room. The circulation is therefore fluid, and the connection between each space is harmonious. Employees can thus enjoy each space, and will always be invited to discover the next one.

Conclusion
IN/OUT is an ambitious architectural project by DTACC architecture and agence Jouin Manku; together, they created two unique buildings for SFL. The campus offers a new approach to workspace based on the ideas of sharing, wellbeing and collective activities. The renovation and construction have greatly improved the campus' amenities, for the benefit of the future users. This project also transforms a typical scenery of the Seine river.



from  dezeen

그리드형

댓글

Designed by JB FACTORY