*핀란드 자연센터-[ Haltia Lahdelma & Mahlamäki ] Finnish Nature Center

반응형


핀란드 자연센터는 2013년 5월 31일에 정식으로 대중에 오픈되었다. 이 곳에는 전시회와 레스토랑 및 컨퍼런스 서비스를 매 년 약 20만 명의 방문객에게 제공할 예정이다. 이 곳에서 행해지는 활동들은 국내외 자연에 관심을 가지고 있고 핀란드의 문화 경제적 삶을 위해 자연이 가진 의미에 관심이 있는 방문객들을 대상으로 하고 있다.

자연센터는 가파른 경사에 위치하고 있어 모든 층이 외부에서 직접적으로 들어올 수 있는 구조이다. 가장 낮은 층에는 교육 시설들이 있고, 증간 층은 리셉션과 전시공간, 그리고 마지막 탑 층은 레스토랑 시설이 갖춰져 있다. 중간 층과 탑층이라는 2개의 메인 층에서 직접적으로 연결된 곳에 다기능 전시실이 있다.

The Finnish nature Centre haltia is designed by lahdelma & Mahlamäki ar- chitects ltd with professor rainer Mahlamäki as the head designer. The centre opens for the public the 31st of May, 2013. The building is located on the shore of lake Pitkäjärvi next to nuuksio national Park in Espoo, 30 km away from helsinki. Total area of the building is 3500 m2 and volume is 18 000 m3.



 


Architects: Lahdelma & Mahlamäki

Location: Nuuksiontie 84, 02820 Espoo, Finland

Architect in Charge: Rainer Mahlamäki

Area: 3500.0 sqm

Project Year: 2013

Photographs: Mika Huisman 

Project Manager: Pöyry CM Oy

Project Director: Juha Välikangas

Tenant / Director: Nuuksiokeskus Oy

Director: Timo Kukko

Principal in charge: Tarja Suvisto, Marko Santala

Collaborators: Jukka savolainen, Miguel Freitas Silva, Sampsa Palva, Akseli Leinonen, Katri Rönkä, Maritta Kukkonen, Maria Jokela

Exhibition: Lahdelma & Mahlamäki Ltd. Sampsa Palva, Petri Saarelainen

Interiors: Architects Lahdelma & Mahlamäki Ltd. Mirja Sillanpää

Landscape: Ma-arkkitehdit, Marja Mikkola

Civil Engineering: Insinööritoimisto Tanskanen Oy, Jouko Tanskanen, Jarkko Kautonen

Electrical Engineering: Insinööritoimisto Stacon Oy, Kalevi Hämäläinen

HVAC engineering: Projectus team Oy, Juha Åberg

Geotechnical Engineering: Geotek Oy,Risto Riisiö, Matti huokuna and soil investigations

Main Contractors: Yit rakennus Oy

Building services: Yit Kiinteistötekniikka Oy

Wood Structures: Eridomic Oy

Cost: 16,7 Million €

Haltia will provide exhibition, restaurant and conference services for estimated 200.000 visitors per year. Activities are aimed for both national and international visitors, who are interested in nature, rambling in nature, and the meaning of nature for Finland’s cultural and economical life.


Haltia has been designed to blend with its location. it is surrounded by the symbols of Finnish nature: granite bedrock, a lake, and dense forest. Haltia’s north face is sheltered inside the rock, while the southern face opens itself towards the lake scenery.


Haltia settles into the steeply sloping lot so that every floor has a direct access from outside. The lowest floor houses educational rooms, the middle floor (where the main entrance is located) houses the reception and exhibition spaces, and the top floor a restaurant facility. The multifunctional auditorium connects the two main floors -top floor and middle floor -together.


On the south side of the building, a lengthy terrace gives continuity to the inner spaces and at the same time shelters glass walls from direct sunshine. All other facades are covered by a closed curving wooden wall, which houses the exhibition spaces.


Environmental friendly solutions have been taken into consideration already during the design phase. Facilities are versatile, flexible and adaptable. The building is technically advanced and utilizes geothermal and solar energy. The roof of the building where solar collectors and panels are located is decked with grass. Haltia is launching a new era of building in the country.


Only the lowest floor which is mainly underground is made of concrete. in all floors above, wood has been used in every aspect of construction from supporting structures to cladding surfaces. the frame of the building – walls, roof and floors – have been built from prefabricated solid-wood panels known as cross-laminated timber. External cladding is made of sawn surface spruce planks, eaves are clad with copper. Internal cladding is made of spruce with fine-sawn waxed surface, and floors are varnished ash.


In haltia’s design, curving free lines meet a rectangular, rational world. the arched and straight lines exhibit the various solutions of building with wood: the possibilities of joinery as well as the combination of on-site building with straight-lined prefabrication, in addition to the various traditional and modern wood processing methods.




































from archdaily

그리드형

댓글

Designed by JB FACTORY